27
8
8
Maintenance Wiper blades
2. Compress the clip and slide the blade
assembly downward.
3. Lift it off the arm.
4. Install the blade assembly in the
reverse order of removal.
Type B
1. Raise the wiper arm.
2. Lift up the wiper blade clip (1). Then
pull down the blade assembly (2) and
remove it.
3. Install the new blade assembly.
4. Return the wiper arm on the wind
-
shield.
5. Turn the ignition switch or ENGINE
START/STOP button to the ON posi
-
tion and wiper arms will return to the
normal operating position.
To Next Page
Loading...
