Specifications & Consumer information
109
Recommended lubricants and capacities
Recommended SAE viscosity number
An engine oil displaying this API Certification Mark conforms to the interna
-
tional Lubricant Specification Advisory Committee (ILSAC). It is recom
-
mended to only use engine oils that uphold this API Certification Mark.
Always be sure to clean the area around any filler plug, drain plug, or dipstick before
checking or draining any lubricant. This is especially important in dusty or sandy
areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick
areas will prevent dirt and grit from entering the engine and other mechanisms that
could be damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather oper
-
ating (engine start and engine oil flowability). Lower viscosity engine oils can provide
better fuel economy and cold weather performance, however, higher viscosity engine
oils are required for satisfactory lubrication in hot weather.
Using oils of any viscosity other than those recommended could result in engine
damage.
Never add any additives to the engine oil. Engine oil additives can change the proper
-
ties of engine oil and may cause serious engine failure.
When choosing an oil, consider the range of temperature your vehicle will be oper
-
ated in before the next oil change. Proceed to select the recommended oil viscosity
from the chart.
Temperature Range for SAE Viscosity Numbers
Temperature
°C
(°F)
Gasoline Engine
Oil
Smartstream
G3.5 GDi
To Next Page
Loading...
