45
3
3
Safety features of your vehicle Child Restraint System (CRS)
ond row center seat LATCH anchor is
also provided. Their locations are shown
in the illustrations. There are no LATCH
anchors provided for the 3rd row center
seating position.
LATCH Lower Anchors
On the third row seating position, never
attempt to attach a LATCH equipped
seat in the center seating position.
LATCH lower anchors are only to be
used in the left and right rear outboard
seating positions. You may damage the
anchors or the anchors may fail and
break in a collision if the seat is in the
center seating position.
The lower anchor position indicator sym
-
bols are located on the left and right rear
seatbacks to identify the position of the
lower anchors in your vehicle (see
arrows in illustration).
1
Lower Anchor position indicator
2
Lower Anchor
The LATCH anchors are located
between the seatback and the seat
cushion of the rear seat left and right
outboard seating positions.
To use the lower anchor, push the upper
portion of the lower anchor cover.
When installing CRS in center seat (For 8
seats), the seat belt buckle should be
extracted from the seat cushion before
-
hand.
Securing a child restraint with the
LATCH anchors system
To install a LATCH-compatible child
restraint in either of the rear outboard
seating positions:
1. Move the seat belt buckle away from
the lower anchors. Otherwise, the
webbing or buckle can be damaged
by the latch anchor, which can make
them become unusable or unsafe.
2. Move any other objects away from
the anchors that could prevent a
secure connection between the child
restraint and the lower anchors.
3. Place the child restraint on the vehicle
seat, then attach the seat to the lower
anchors according to the instructions
provided by the child restraint manu
-
facturer.
4. Follow the child restraint instructions
for properly adjusting and tightening
the lower attachments on the child
restraint to the lower anchors.
To Next Page
Loading...
