SEDONA FEATURES & FUNCTIONS GUIDE
10
When the LDW sensor detects the
lane traveling in, the lane is illuminated
When the LDW sensor does not detect the
lane traveling in the lane is not illuminated
Lane Departure
Lane Departure
Lane Departure
Lane Departure
Lane Departure
Lane Departure
Lane Departure
When the LDW sensor
detects the vehicle veering
outside of the lane traveling
in, the lane the vehicle is
crossing will blink (shown in
both images at left)
Lane Departure
Lane Departure
Lane Departure
Lane Departure
Lane Departure
Lane Departure
Lane Departure
(Button panel
located left of
Steering Wheel)
A
Lane Departure
Warning Video
Forward Collision-
Avoidance Assist Video
QR CODES
Lane Departure Warning (LDW)*
†6
With the Engine Start/Stop button in the ON position, press the LDW button
A
to
turn system ON. The instrument cluster indicator will initially illuminate white.
It will remain white when vehicle is traveling slower than 40 mph and the system
does not detect the lane markers. When the LDW system detects the
lane markers, the LDW icon will illuminate green.
If LDW detects that you are moving outside of your lane, the system
may issue a warning on the LCD screen and an alert may sound.
The system will operate under the following conditions:
• The vehicle speed exceeds approximately 40 mph
• The LDW system recognizes the lane the vehicle is traveling in
• The vehicle is between the lane markers
If the LDW button is ON or OFF and ignition is
cycled, the system remains in the previous state.
REMINDERS:
• LDW will not issue a warning if the turn
signal or hazard signal is activated.
• LDW in the current state will stay on
when the ignition is cycled
Forward Collision-Avoidance Assist-Pedestrian (FCA-Ped) / Forward Collision Warning (FCW)*
†9
FCA-Ped is designed to help alert the driver and, under certain conditions, apply emergency braking when rapidly approaching a vehicle that is slowing down,
braking or stopped. Initially, the FCA-Ped provides Forward Collision Warning (FCW) when it detects a potential collision with a vehicle in front emitting an audible
warning and visual alert on the instrument cluster. Adjust the alert settings (Early, Normal, Late) in the User Settings. To turn the FCA-Ped / FCW off, go to User
Settings again and turn off. If the system detects that the collision risk increases, Forward Collision-Avoidance
Assist-Pedestrian (FCA-Ped) automatically applies the brakes to reduce your speed, helping to minimize the effects
of a possible collision. FCA-Ped can be turned ON in the User Settings menu on the Instrument Cluster display.
FCA-Ped / FCW will become active when the:
• Engine Start/Stop button is ON
• Vehicle is traveling faster than 5 mph
• Electronic Stability Control
(ESC) is ON
REMINDERS:
• The FCA-Ped / FCW will be activated by default
when vehicle power is cycled on, even when
previously set to off
• The FCA-Ped / FCW will not operate when the vehicle
is traveling faster than approximately 50 mph
• If FCA-Ped is operating and the ESC (Electronic
Stability Control) is turned off, the FCA-Ped system
is automatically turned off
• When FCA-Ped is off, the FCA-Ped warning
indicator is on in the Instrument Cluster
Lane Departure Warning (LDW) is not a substitute for safe and proper driving. Always drive safely and
use caution. LDW may not always alert the driver if the vehicle is driven outside of its lane.
Forward Collision-Avoidance Assist-Pedestrian
(FCA-Ped) / Forward Collision Warning (FCW)* are
not substitutes for safe and proper driving. Always
drive safely and use caution. FCA-Ped / FCW may
not always alert the driver when the vehicle is
approaching another vehicle.
*IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
DRIVER'S PANEL
To Next Page
Loading...
