Features of your vehicle
1344
To flash the headlights, pull the lever
towards you. It will return to the nor-
mal (low beam) position when
released. The headlight switch does
not need to be on to use this flashing
feature.
High Beam Assist (if equipped)
The High Beam Assist is a system
that automatically adjusts the head-
lamp range (switches between high
beam and low beam) according to
the brightness of other vehicles and
road conditions.
Operating condition
1. Place the light switch in the AUTO
position.
2. Turn on the high beam by pushing
the lever away from you.
The High Beam Assist ( ) indi-
cator will illuminate.
3. The High Beam Assist will turn on
when vehicle speed is above
45km/h (24.8mph).
• If the lever is pushed away when
the High Beam Assist is operat-
ing, the High Beam Assist will
turn off and the high beam will
be on continuously. The High
Beam Assist ( ) indicator will
turn off.
• If the lever is pulled towards you
when the High Beam Assist is
operating, the High Beam Assist
will turn off.
4. If the light switch is placed to the
headlamp position, the High
Beam Assist will turn off and the
low beam will be on continuously.
OYP047358
OYP047362
To Next Page
Loading...
