327
Safety features of your vehicle
To use the rear seat :
1. Lift the seat by pulling up the stow-
ing lever.
2. Release the lever and push the
seat forward firmly until it clicks
into place to insert the catches
into the anchors.
✽✽
NOTICE
Do not push down the upper part of
the seatback when pushing the seat
forward. Doing so can prevent the
catches from being locked in posi-
tion.
3. Make sure the catches are locked
in position by moving the seat for-
ward and backward or lifting the
front portion of the seat. If the seat
moves, it is not locked properly.
OYP034287NOYP037243NOYP037286
To Next Page
Loading...
