Safety features of your vehicle
323
To raise the headrest :
1. Pull it up to the desired position
(1).
To lower the headrest :
1. Push and hold the release button
(2) on the headrest support
2. Lower the headrest to the desired
position (3).
Removal and reinstallation
To remove the headrest :
1. Raise it as far as it can go then
press the release button (1) while
pulling the headrest up (2).
To reinstall the headrest :
1. Put the headrest poles (3) into the
holes while pressing the release
button (1).
2. Adjust it to the appropriate height.
After installing the headrest, make
sure that it is installed in the right
direction.
A headrest installed reversely could
increase whiplash injury during rear
impact.
OYP034248N
OYP034250N
CAUTION - Auto-folding
headrest
Do not remove the headrest in
vehicles equipped with the sec-
ond row auto-folding function.
The cable may become dislocat-
ed or damaged when the head-
rest is removed, and may lead to
auto-folding function failure.
To Next Page
Loading...
