Kia Sedona - Page 547

777
Maintenance
Headlamp (bulb type) -high/low 1. Open the hood.
2. Remove the front cover(1) and
headlamp assembly nuts(2).
3. Remove the headlamp assembly
from the body of the vehicle
4. Remove the headlamp bulb cover
by turning it counterclockwise.
5. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
6. Remove the bulb by pulling it out.
7. Inset a new bulb by inserting it into
the socket.
8. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
9. Install the headlamp bulb cover by
turning it clockwise.
Turn signal lamp/Position lamp
Follow the steps 1 to 3 from the pre-
vious page.
4. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
5. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket
OYP074068N
OYP074069N
OYP074055N
High lamp
Low lamp
OYP074056N