95
4
4
Features of your vehicle Lighting
Operating high beam
To turn on the high beam headlamp:
䳜 Push the lever away from you.
The lever will return to its original
position.
The high beam indicator will light
when the headlight high beams
are switched on.
Do not use high beam when there
are other vehicles. Using high beam
could obstruct the other driver's
vision.
To flash the headlights:
䳜 Pull the lever towards you.
It will return to the normal (low
beam) position when released.
The headlight switch does not
need to be on to use this flashing
feature.
Operating turn signals and lane
change signals
The ENGINE START/STOP button
must be on for the turn signals to
function.
To turn on the turn signals:
䳜 Move the lever up or down (A).
The green arrow indicators on the
instrument panel indicate which
turn signal is operating.
To Next Page
Loading...
