11
5
5
Infotainment system Audio (Without Touch Screen)
About handling the system
䳜 Do not apply excessive force to
the system. Excessive pressure
on the screen may damage the
LCD panel or the touch panel.
䳜 When cleaning the screen or but
ton panel, make sure to stop the
engine and use a soft, dry cloth.
Wiping the screen or buttons with
a rough cloth or using solvents
(alcohol, benzene, paint thinner,
etc.) may scratch or chemically
damage the surface.
If you attach a liquid-type air
freshener to the air conditioning
vents, the keyboard surface
underneath those vents may be
deformed if the perfume spills
on it.
䳜 If you want to change the position
of the installed device, please
inquire with your place of pur
chase or service maintenance
centre. Technical expertise is
required to install or disassemble
the device.
䳜 If you experience any problems
with the system, contact your
place of purchase or dealer.
䳜 Placing the infotainment system
within an electromagnetic envi
ronment may result in noise
interference.
Turning the system on or off
To turn on the system, start the
engine.
䳜 If you do not want to use the sys
tem while driving, you can turn
off the system by pressing the
[POWER] button on the control
panel. To use the system again,
press the [POWER] button again.
After you have turned off the
engine, the system will automati
cally turn off after a while or as
soon as you open the driver's door.
䳜 Depending on the vehicle model or
specifications, the system may
turn off as soon as you turn off
the engine.
䳜 When you turn back on the sys
tem, the previous mode and set
tings will remain intact.
䳜 Some functions may be disabled
for safety reasons while the vehi
cle is moving. They work only
when the vehicle stops. Park your
vehicle in a safe location before
using any of them.
䳜 Stop using the system if it mal
functions, such as no audio output
or display. If you continue using
the system when it is malfunc
tioning, it may lead to a fire, elec
tric shock, or system failure.
To Next Page
Loading...
