Infotainment system
145
Radio
[TUNE] knob to select the
desired position, and then press
the knob. To set sound to be
centred in the vehicle, select
Centre.
- Equaliser: Adjust the output
level for each sound tone mode.
- Sound experience: Select the
location where sound is focused
in the vehicle between the
driver's seat and all other seats.
- Speed dependent vol.: Set the
volume to be adjusted auto
matically according to your
driving speed.
䳜 Depending on vehicle models or
specifications, available options
may vary.
䳜 Depending on the system or
amplifier specifications applied to
your vehicle, available options
may vary.
䳜 Mode popup: Set to display mode
selection window when the
[AUDIO] button is pressed on the
control panel.
䳜 Bluetooth remote lock: Even if
Bluetooth remote control applica
tion is connected, if Set Lock
remote controls is enabled. Sys
tem cannot be operated via smart
phone application.
䳜 Date/Time: You can change the
date and time that are shown on
the system display.
- Set date: Set date to display on
the system display.
- Set time: Set time to display on
the system display.
- Time format: Select to display
time in the 12 hour format or
the 24 hour format.
- Display (Power Off): Set to dis
play the clock when the system
power is off.
䳜 Language: You can change the
display language.
Changing the radio mode
1. On the control panel, press the
[AUDIO] button.
2. When the mode selection window
displays, turn the [TUNE] knob to
select the desired radio mode and
then press the knob.
䳜 Each time you press the
[MODE] button on the steering
wheel, the radio mode switches
to FM ▶ AM in order.
To Next Page
Loading...
