EasyManua.ls Logo

Kia seltos 2023 - Vehicle Modifications; Vehicle Break-In Process

Kia seltos 2023
566 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
41
Vehicle modifications
Vehicle modifications
This vehicle should not be modified.
Modification of your vehicle could affect
its performance, safety or durability and
may even violate governmental safety
and emissions regulations. In addition,
damage or performance problems
resulting from any modification may not
be covered under warranty.
If you use unauthorised electronic
devices, it may cause the vehicle to
operate abnormally, wire dam-age,
battery discharge and fire.
For your safety, do not use unauthorised
electronic devices.
Vehicle break-in process
By following a few simple precautions
for the first 1,000 km (600 miles) you
may add to the performance, economy
and life of your vehicle.
Do not race the engine.
Whilst driving, keep your engine
speed (rpm, or revolutions per min
-
ute) between 2,000 rpm and 4,000
rpm.
Do not maintain a single speed for
long periods of time, either fast or
slow. Varying engine speed is needed
to properly break-in the engine.
Avoid hard stops, except in emergen
-
cies, to allow the brakes to seat prop
-
erly.
Don't tow a trailer during the first
2,000 km (1,200 miles) of operation.
Fuel economy and engine perfor
-
mance may vary depending on vehi
-
cle break-in process and stabilize
after 6,000 km (4,000 miles). New
engines may consume more oil during
the vehicle break-in period.

Table of Contents

Related product manuals