95
4
4
Features of your vehicle Rear View Monitor (RVM)
Rear View Monitor (RVM) (if
equipped)
Rear View Monitor will activate when the
back-up light is ON with the ignition
switch ON and the shift lever in the R
(Reverse) position. Rear View Monitor is
a supplemental function that shows
behind the vehicle through Infotainment
system whilst backing-up.
Detecting sensor
[1]: Wide-rear view camera
Refer to the picture above for the
detailed location of the detecting sensor.
Rear View Monitor settings
Camera settings
You can change Rear View Monitor ‘Dis
-
play contents’ and 'Display settings' or
by touching the setup icon ( ) on the
screen whilst Rear View Monitor is oper
-
ating, or selecting ‘Settings → Vehicle →
Driver assistance → Parking safety →
Camera settings’ from the Settings
menu whilst the engine is on.
僅 Display contents: To change the set
-
tings of rear view with parking guid
-
ance, Rear View whilst driving
僅 Display settings: To change the
screen's brightness and contrast.
Warning methods (or Warning
volume)
You can adjust the Warning methods (or
Warning volume) with the ignition switch
or ENGINE START/ STOP button in the
ON position.
Parking safety priority : Select 'Settings
→ Vehicle → Driver assistance → Warn
-
ing methods (or Warning volume) →
Parking safety priority’ on the Infotain
-
ment system for safe parking. The audio
volume will temporarily decrease to
warn the driver with the audible warn
-
ing.
僅 Ensure that Warning methods (or
Warning volume) you have set may
apply to the Warning volume of other
Driver assistance systems.
僅 Warning methods (or Warning vol
-
ume) will maintain its last setting even
if the vehicle is restarted.
僅 The setting menu may not be avail
-
able for your vehicle depending on
the vehicle features and specifica
-
tions.
To Next Page
Loading...
