Kia seltos 2023 - Page 198

Features of your vehicle
1164
Lighting
High Beam Assist setting
With the ignition switch or ENGINE
START/STOP button in the ON position,
select 'User settings → Lights → HBA
(High Beam Assist)' on the LCD display
or 'Settings → Vehicle → Lights → HBA
(High Beam Assist)' on the infotainment
system.
WARNING
For your safety, change the Settings
after parking the vehicle at a safe loca -
tion.
High Beam Assist operation
Display and control
僅 After selecting 'HBA (High Beam
Assist)' in the Settings menu, High
Beam Assist will operate by following
the procedure below.
- Place the headlamp switch in the
AUTO position and push the head -
lamp lever towards the instrument
cluster. High Beam Assist 「 」
indicator light will appear on the
cluster and the function will be
enabled.
- When the function is enabled, high
beam will turn on when vehicle
speed is above 30 km/h (20 mph).
When vehicle speed is below 20
km/h (12 mph), high beam will not
turn on.
- The High Beam 「 」 indicator
light will appear on the cluster
when high beam is on.
僅 When High Beam Assist is operating,
if the headlamp lever or switch is
used, the function operates as follow:
- If the headlamp lever is pulled
towards you when the high beam is
off, the high beam will turn on with -
out High Beam Assist cancelled.
When you let go of the headlamp
lever, the lever will move to the
middle and the high beam will turn
off.
- If the headlamp lever is pulled
towards you when the high beam is
on by High Beam Assist, low beam
will be on and the function will turn
off.
- If the headlamp switch is placed
from AUTO to another position
(headlamp/position/off), High
Beam Assist will turn off and the
corresponding lamp will turn on.
僅 When High Beam Assist is operating,
high beam switches to low beam if
any of the following conditions occur:
- When the headlamp of an oncom -
ing vehicle is detected.
- When the tail lamp of a vehicle in
front is detected.
- When the headlamp or tail lamp of
a motorcycle or a bicycle is
detected.
- When the surrounding ambient
light is bright enough that high
beams are not required.
OSP2042616R