117
4
4
Features of your vehicle Lighting
- When streetlights or other lights are
detected.
High Beam Assist malfunction
and limitations
High Beam Assist malfunction
When High Beam Assist is not working
properly, the 'Check HBA (High Beam
Assist) system' warning message will
appear and 「 」 warning light will
appear on the cluster. In this case, have
the function inspected by a professional
workshop. Kia recommends to visit an
authorised Kia dealer/service partner.
Limitations of High Beam Assist
High Beam Assist may not work properly
in the following situations:
僅 Light from a vehicle is not detected
because of lamp damage, or because
it is hidden from sight, etc.
僅 Headlamp of a vehicle is covered with
dust, snow or water.
僅 A vehicle's headlamps are off but the
fog lamps are on and etc.
僅 There is a lamp that has a similar
shape as a vehicle's lamp.
僅 Headlamps have been damaged or
not repaired properly.
僅 Headlamps are not aimed properly.
僅 Driving on a narrow curved road,
rough road, uphill or downhill.
僅 Vehicle in front is partially visible on a
crossroad or curved road.
僅 There is a traffic light, reflecting sign,
flashing sign or mirror ahead.
僅 There is a temporary reflector or flash
ahead (construction area).
僅 The road conditions are bad such as
being wet, iced or covered with snow.
僅 A vehicle suddenly appears from a
curve.
僅 The vehicle is tilted from a flat tyre or
is being towed.
僅 Light from a vehicle is not detected
because of exhaust fume, smoke, fog,
snow, etc.
For more details on the limitations of the
front view camera, refer to "Forward Col
-
lision-Avoidance Assist (FCA) (Sensor
fusion) (if equipped)" on page 5-65.
僅 At times, High Beam Assist may not
work properly. The function is for your
convenience only. It is the responsibil
-
ity of the driver for safe driving prac
-
tices and always check the road
conditions for your safety.
僅 When High Beam Assist does not
operate normally, change the head
-
lamp position manually between high
beam and low beam.
To Next Page
Loading...
