147
4
4
Features of your vehicle Windscreen defrosting and defogging
Type B
1. Set the fan speed to the highest posi
-
tion.
2. Set the temperature to the extreme
hot (HI) position.
3. Press the defroster button ( ).
4. The outside (fresh) air position will be
selected automatically and the air
conditioning will turn on according to
the detected ambient temperature.
Defogging logic (if equipped)
To reduce the possibility of fogging up
the inside of the windscreen, the air
intake or air conditioning is controlled
automatically according to certain con
-
ditions such as or position.
To cancel automatic defogging logic or
return to the automatic defogging logic,
do the following.
Canceling/returning automatic
defogging logic on manual cli
-
mate control system
1. Turn the ENGINE START/STOP button
to the ON position.
2. Select the ( ) position.
3. Press the air intake control button at
least 5 times within 3 seconds.
The indicator light in the air intake
control button will blink 3 times. It
indicates that the defogging logic is
cancelled or returned to the pro
-
grammed status.
If the battery has been discharged or
disconnected, it resets to the defog logic
status.
To Next Page
Loading...
