Driving your vehicle
505
Brake system
DBC operation
Mode Indicator light Description
Standby
illuminated
Press the DBC button when vehicle speed is under 60 km/h
(38 mph). The DBC system will turn ON and enter the
standby mode.
The system does not turn ON if vehicle speed is over 60 km/
h (38 mph).
Activated
blinks
In the standby mode, It enters the operating mode when the
following conditions are met.
僅 The road surface should be more than a certain angle of
inclination
僅 The accelerator pedal must not be depressed.
僅 The vehicle speed should be within 4 km/h (2.5 mph) ~ 40
km/h (25 mph)
- 2.5 km/h (1.5 mph) ~ 8 km/h (5 mph) in case of back
-
ward movement
Within operating vehicle speed [4 km/h (2.5 mph) ~ 40 km/h
(25 mph)], the driver can lower or raise the vehicle speed by
stepping on the brake pedal or accelerator pedal.
Temporarily
deactivated
illuminated
In the activated mode, the DBC will temporarily deactivate
under the following conditions:
僅 The hill is not steep enough.
僅 The accelerator pedal is depressed.
僅 When the vehicle speed is in the range of 40 km/h (25
mph) ~ 60 km/h (38 mph)
If the above conditions are not met, the DBC will automati
-
cally activate again.
OFF
not illuminated
The DBC will turn OFF under the following conditions:
僅 The DBC button is pressed again.
僅 When the accelerator pedal is depressed and the vehicle
speed exceeds 60 km/h (38 mph)
To Next Page
Loading...
