7
3
3
Safety features of your vehicle Seat
Therefore, children should never be left
unattended in the car.
僅 The power seat is driven by an electric
motor. Stop operating once the
adjustment is completed. Excessive
operation may damage the electrical
equipment.
僅 When in operation, the power seat
consumes a large amount of electrical
power. To prevent unnecessary
charging system drain, don't adjust
the power seat longer than necessary
whilst the engine is not running.
僅 Do not operate two or more power
seat control switches at the same
time. Doing so may result in power
seat motor or electrical component
malfunction.
Moving forward and backward
To move the seat forward or backward:
1. Push the control switch forward or
rearward to move the seat to the
desired position.
2. Release the switch once the seat
reaches the desired position.
Reclining seatback
To recline the seatback:
1. Push the control switch forward or
rearward to move the seatback to the
desired angle.
2. Release the switch once the seat
reaches the desired position.
Adjusting seat cushion tilt and
height
To adjust the height of the seat:
1. Pull the front portion of the control
switch up to raise or press down to
lower the height of seat.
Pull the rear portion of the control
switch up to raise or press down to
lower the seat cushion.
To Next Page
Loading...
