Safety features of your vehicle
83
Seat
2. Release the switch once the seat
reaches the desired position.
Adjusting lumbar support (for
driver's seat) (if equipped)
The lumbar support can be adjusted by
pressing the lumbar support switch on
the side of the seat.
1. Press the front portion of the switch to
increase support, or the rear portion
of the switch, to decrease support.
2. Release the switch once it reaches the
desired position.
Headrest (for front seat)
The driver's and front passenger's seats
are equipped with a headrest for the
occupant's safety and comfort.
The headrest not only provides comfort
for the driver and front passenger, but
also helps protect the head and neck in
the event of a collision.
僅 For maximum effectiveness in case of
an accident, the headrest should be
adjusted so the middle of the head
-
rest is at the same height of the centre
of gravity of an occupant's head. Gen
-
erally, the centre of gravity of most
people's head is similar with the
height of the top of their eyes. Also,
adjust the headrest as close to your
head as possible. For this reason, the
use of a cushion that holds the body
away from the seatback is not recom
-
mended.
僅 Do not operate the vehicle with the
headrests removed or reversed as
severe injury to the occupants may
occur in the event of an accident.
Headrests may provide protection
against neck injuries when properly
adjusted.
僅 Do not adjust the headrest position of
the driver's seat whilst the vehicle is in
motion.
To Next Page
Loading...
