Safety features of your vehicle
103
Seat
Type B
To remove the headrest:
1. Recline the seatback (2) with the
recline lever or switch (1).
2. Raise headrest as far as it can go.
3. Press the headrest release button (3)
whilst pulling the headrest up (4).
NEVER allow anyone to ride in a seat
with the headrest removed.
Reinstalling headrest
Type A
Type B
To reinstall the headrest:
1. Put the headrest poles (2) into the
holes whilst pressing the release but
-
ton (1).
2. Recline the seatback (4) with the
recline lever or switch (3).
3. Adjust the headrest to the appropriate
height.
Always make sure the headrest locks
into position after reinstalling and
adjusting it properly.
Seatback pocket (if equipped)
The seatback pocket is provided on the
back of the front passenger's seatback.
To Next Page
Loading...
