Driving your vehicle
945
Manual Speed Limit Assist (MSLA)
desired speed. The Speed Limit indi
-
cator will Illuminate on the cluster.
2. Push the + switch up or - switch down,
and release it at the desired speed.
Push the + switch up or - switch down
and hold it. The speed will increase or
decrease to the nearest multiple of
ten (multiple of five in mph) at first,
and then increase or decrease by 10
km/h (5 mph).
3. The set speed limit will be displayed
on the cluster. If you would like to
drive over the preset speed limit,
depress the accelerator pedal beyond
the pressure point to activate the kick
-
down function.
The set speed limit will blink and
chime will sound until you return the
vehicle speed within the speed limit.
When the accelerator pedal is not
depressed beyond the pressure point,
vehicle speed will maintain within the
speed limit.
Temporarily pausing Manual
Speed Limit Assist
Press the switch to temporarily
pause the set speed limit. The set speed
limit will turn off but the Speed Limit
indicator will stay on.
Resuming Manual Speed Limit
Assist
To resume Manual Speed Limit Assist
after the function was paused, operate
the +, - or switch.
To Next Page
Loading...
