Safety features of your vehicle
123
Seat
僅 To lower the headrest, push and hold
the release button (2) on the headrest
support and lower the headrest to the
desired position (3).
Removal and installation
僅 To remove the headrest, raise it as far
as it can go then press the release
button (1) whilst pulling the headrest
up (2).
僅 To reinstall the headrest, put the
headrest poles (3) into the holes whilst
pressing the release button (1).
僅 Then adjust it to the appropriate
height.
Make sure the headrest locks in position
after adjusting it to properly protect the
occupants.
Armrest (if equipped)
To use the armrest, pull it forward from
the seatback.
Folding the rear seat
The rear seatbacks can be folded to
facilitate carrying long items or to
increase the luggage capacity of the
vehicle.
The purpose of the fold-down rear seat
-
backs is to allow you to carry longer
objects that could not be accommo
-
dated in the cargo area.
Never allow passengers to sit on top of
the folded down seatback whilst the
vehicle is moving. This is not a proper
seating position and no seat belts are
available for use. This could result in
serious injury or death in case of an acci
-
dent or sudden stop. Objects carried on
the folded down seatback should not
extend higher than the top of the front
seatbacks. This could allow cargo to
slide forward and cause injury or dam
-
age during sudden stops.
To Next Page
Loading...
