13
3
3
Safety features of your vehicle Seat
To fold down the rear seatback
1. Insert the rear seat belt buckle in the
pocket between the rear seatback
and cushion.
Then, insert the seat belt into the two
holes located on both sides.
2. Set the front seatback to the upright
position and if necessary, slide the
front seat forward.
For rear seatback, take the following
steps:
1. Lower the rear headrests to the lowest
position.
2. Pull on the seatback folding lever,
then fold the seat toward the front of
the vehicle.
Damaging rear seat belt buckles
When you fold the rear seatback, insert
the buckle in the pocket between the
rear seatback and cushion. Doing so can
prevent the buckle from being damaged
by the rear seatback.
Rear seat belts
When returning the rear seatbacks to
the upright position, remember to insert
the rear shoulder belts tongue in the
holder provided in Luggage side trim.
This will avoid seat belt to be trapped in
the back locking mechanism.
Cargo
Cargo should always be secured to pre
-
vent it from being thrown about the
vehicle in a collision and causing injury
to the vehicle occupants. Do not place
objects in the rear seats, since they can
-
To Next Page
Loading...
