Kia seltos 2023 - Drivers Memory Seat (if Equipped, for Power Seat); 僅 Recalling Positions from Memory; 僅 Storing Drivers Seat Positions

15
3
3
Safety features of your vehicle Driver’s memory seat (if equipped, for power seat)
Driver’s memory seat (if
equipped, for power seat)
Driver’s memory seat is provided to
store and recall the driver seat with a
simple button operation. By saving the
desired position into the system mem -
ory, different drivers can reposition the
driver seat based upon their driving
preference. If the battery is discon -
nected, the position memory will be
erased and the driving position should
be restored in the system.
僅 Driver’s seat: Location
僅 Head up Display (HUD): Height and
Rotation
WARNING
Never attempt to operate the driver’s
memory seat whilst the vehicle is mov -
ing.
This could result in loss of control, and
an accident causing death, serious
injury, or property damage.
NOTICE
If the battery is disconnected, the mem -
ory settings will be erased.
Storing driver’s seat positions
1. Shift to P (Park) whilst the ENGINE
START/STOP button is in the ON posi -
tion.
2. Adjust the driver’s seat position and
head-up display height to the desired
position.
3. Hold the button (1 or 2). The system
will beep once and notify you 'Settings
1 (or 2) saved' will appear on the LCD
display.
Recalling positions from memory
1. Shift to P (Park) whilst the ENGINE
START/STOP button is in the ON posi -
tion.
2. Press the desired memory button (1 or
2). The system will beep once, and
then the driver’s seat position and
head-up display height will automati -
cally adjust to the stored positions.
3. 'Settings 1 (or 2) applied' will appear
on the LCD display.
WARNING
Use caution when recalling the adjust -
ment memory whilst sitting in the vehi -
cle. Push the seat position control switch
to the desired position immediately if the
seat moves too far in any direction.
僅 In order to adjust the memory button
(2) whilst adjusting the memory but -
ton (1), press the memory button (1) to
pause the adjustment of (1), then
press memory button (2).
僅 If you adjust the seat whilst recalling
the stored positions, the manually
adjusted settings will be applied.
OSP2032074R