EasyManua.ls Logo

Kia seltos 2023 - 僅 Easy Access Function; 僅 Resetting the System

Kia seltos 2023
566 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety features of your vehicle
163
Driver’s memory seat (if equipped, for power seat)
Easy access function (if
equipped)
Seat easy access will move the driver’s
seat automatically as follows:
Exiting the vehicle:
The driver’s seat will move as follows
when the ENGINE START/STOP button
is in the OFF position with the gear in P
(Park) and the driver’s door open.
Driver seat:
Moves rearward depending on the dis
-
tance selected from the Settings menu
in the infotainment system.
However, the driver’s seat may not move
rearward if there is not enough space
between the driver’s seat and the rear
seats.
Entering the vehicle:
The driver’s seat will move as follows
when the Start/Stop button is pressed to
the ACC, ON or START position or whilst
carrying the smart key, the driver’s door
is closed with the Start/ Stop button in
the OFF position.
Driver seat: Moves back to its original
position.
Setting
You can set the Seat Easy Access func
-
tion from the Settings menu in the info
-
tainment system screen.
Driver seat
Settings → Vehicle → Seat → Seating
Easy Access → Driver Seat Easy Access
Normal/Extended/Off
INFORMATION
The infotainment system may change
after software updates. For more infor
-
mation, refer to the manual provided in
the infotainment system and the quick
reference guide.
Resetting the system
Take the following procedures to reset
integrated memory system, when it does
not operate properly.
Resetting driver’s memory seat
1. Stop the vehicle and open the driver’s
door with the ENGINE START/STOP
button in the ON position and the
vehicle shifted to P (Park).
2. Adjust the driver’s seat and seatback
to the foremost position.
3. Press the memory button 1 (or 2) and
push forward the driver’s seat move
-
ment switch over 2 seconds simulta
-
neously.
Whilst resetting driver’s memory
seat
1. Resetting starts with a notification
sound.
2. The driver’s seat and seatback is
adjusted to the rearward position with
the notification sound.
3. The driver’s seat and seatback is re-
adjusted to the default position (cen
-
tral position) with the notification
sound. However, in the following
cases, the resetting procedure and
the notification sound may stop.
The memory button is pressed.
The seat control switch is operated.
The gear is shifted out of P (Park).
The driving speed exceeds 3 km/h (2
mph).

Table of Contents

Related product manuals