Safety features of your vehicle
223
Seat belts
operating normally. Replace any belts
that are not functioning appropriately.
1. Rear right seat belt fastening buckle
2. Rear centre seat belt fastening buckle
3. Rear left seat belt fastening buckle
Prior to fastening the rear seat belts,
ensure the latch matches the seat belt
buckle. Forcefully fastening the left or
right seat belt to the centre buckle can
result in an improper fastening scenario
that will not protect you in an accident.
When using the rear centre seat belt, the
buckle with the "CENTER" mark must be
used.
Do not separate mini tongue (1) and mini
buckle (2) even if there is not an occu
-
pant.
If it is separated, It may hit the rear seat
occupants in a collision or sudden stops.
Stowing the rear seat belt
You can adjust the height of the shoul
-
der belt anchor to one of 3 positions for
maximum comfort and safety.
1. Route the seat belt webbing through
the rear seat belt guides. It will help
keep the belts from being trapped
behind or under the seats.
2. After inserting the seat belt, tighten
the belt webbing by pulling it up.
To Next Page
Loading...
