Maintenance
307
Checking fluid levels
Checking fluid levels
When checking engine oil, engine cool
-
ant, brake/clutch fluid, and washer fluid,
always be sure to clean the area around
any filler plug, drain plug, or dipstick
before checking or draining any lubri
-
cant or fluid. This is especially important
in dusty or sandy areas and when the
vehicle is used on unpaved roads. Clean
-
ing the plug and dipstick areas will pre
-
vent dirt and grit from entering the
engine and other mechanisms that
could be damaged.
Engine oil and filter
Checking the engine oil level
Engine oil is used for lubricating, cooling,
and operating various hydraulic compo
-
nents in the engine. Engine oil consump
-
tion whilst driving is normal, and it is
necessary to check and refill the engine
oil regularly. Also, check and refill the oil
level within the recommended mainte
-
nance schedule to prevent deterioration
of oil performance. Check the engine oil
following the below procedure.
(Petrol) 1.6 MPI
Smartstream G 1.6 T-GDi
To Next Page
Loading...
