Kia seltos 2023 - Page 548

Specifications & Consumer information
88
Recommended lubricants and capacities
*1. Refer to
"Recommended SAE viscosity number" on page 8-9
.
*2. Requires <API SN PLUS (or above) or ACEA A5/B5 Full synthetic> grade engine oil. If a lower grade engine
oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be
replaced as indicated severe maintenance condition.
*3. Requires <API SN PLUS (or above) Full synthetic)> grade engine oil. If a lower grade engine of (mineral oil
including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated
severe maintenance condition.
*4. Use only specified genuine intelligent variable transmission fluid. The use of non-specified fluid (even
marked as compatible with genuine) could result in shift quality deterioration and vibrations, eventually,
the transmission failure.
*5. To maintain your vehicle`s best brake and ABS/ESC performance, use Kia genuine brake fluid or those of
an equivalent standard brake fluid as in the specification.
Intelligent Variable
Transmission (IVT)
fluid
(Petrol) 2.0 MPI 6.7 L
MICHANG SP-CVT1, Kia Genuine ATF SP-CVT1
*4
Rear differential oil (4WD) 0.5 L
Hypoid gear oil API Gl-5, SAE 75W/85 (SK HCT-5
75W/85 or equivalent)
Transfer case oil
(AWD)
(Petrol) 1.6
MPI
MT 0.5 L
AT 0.4 L
Smart -
stream G
1.6 T-GDi
AT 0.5 L
(Petrol)
2.0 MPI
IVT 0.4 L
Coolant
(Petrol) 1.6
MPI
MT 6.1 L
An Phosphate based ethylene glycol based coolant
AT 5.8 L
Smart -
stream G
1.6 T-GDi
AT 6.6 L
(Petrol)
2.0 MPI
IVT 6.1 L
Brake/clutch fluid
*5
MT
502±20
cc
SAEJ1704 DOT-4 LV, FMVSS 116 DOT-4, ISO 4925
CLASS-6
AT
474±20
cc
Fuel 50 L -
Lubricant Volume Classification