Safety features of your vehicle
323
Child restraint system (CRS)
僅 NEVER attach more than one Child
Restraint System to a single anchor
-
age. This could cause the anchor or
attachment to come loose or break.
僅 Always have the ISOFIX (i- Size) sys
-
tem inspected by your dealer after an
accident. An accident can damage the
ISOFIX system and may not properly
secure the Child Restraint System.
Securing a Child Restraint System
seat with "Top-tether Anchorage"
system (if equipped)
Child restraint system top tether anchor
-
ages are located on the back of the rear
seatbacks.
Type A
Type B
To install the tether anchor:
1. Route the Child Restraint System top-
tether strap over the seatback. Plac
-
ing the top tether strap, please follow
the instructions of the Child Restraint
System manufacturer.
2. Connect the top-tether strap to the
top-tether anchorage, then tighten
the top-tether strap according to the
instructions of your Child Restraint
System's manufacturer to firmly
attach the Child Restraint System to
the seat.
Take the following precautions when
installing the top-tether:
僅 Read and follow all installation
instructions provided with your Child
Restraint System.
僅 NEVER attach more than one Child
Restraint System to a single ISOFIX
top-tether anchorage. This could
cause the anchorage or attachment to
come loose or break.
僅 Do not attach the top-tether to any
-
thing other than the correct top-tether
anchorage. It may not work properly if
attached to something else.
To Next Page
Loading...
