Kia SELTOS - Starting the engine

ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS. *IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
13
RES
SET
CNCL
+
–
CRUISE
OK
RES
SET
CNCL
+
–
CRUISE
OK
RES
SET
CNCL
+
–
CRUISE
OK
RES
SET
+
–
CRUISE
OK
RES
SET
+
–
CRUISE
OK
RES
SET
+
–
CRUISE
MODE
OK
RES
SET
+
–
CRUISE
CANCEL
CANCEL
OK
RES
SET
+
–
CRUISE
CANCEL
OK
MODE
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
ADAS
COLLISION WARNING
EMERGENCY BRAKING
FCA is designed to detect and monitor a vehicle ahead or detect a pedestrian in the roadway through front
view camera recognition and front radar signals to warn the driver that a collision is imminent,
and if necessary, temporarily apply emergency braking. Initially, FCA provides Forward Collision Warning
(FCW) when it detects a potential collision with a vehicle, pedestrian, or cyclist, emitting an audible
warning and visual alert on the instrument cluster
A
.
If the system detects that the collision risk has increased, Forward Collision-Avoidance Assist (FCA)
automatically applies the brakes to reduce your speed, potentially
helping to reduce the effects of a possible collision.
FCA User Settings:
• FCA is ON by default in most Kia models. FCA can be turned
ON/ OFF by going to the User Settings in the Instrument Cluster
• To go to User Settings , press the Mode button
B
on the Steering Wheel when the vehicle is at a
standstill, gear shift in Park and with the ignition on or the Engine Start/Stop button* in the ON position
• Press the OK button
C
up/down and select User Settings then Driver Assistance
– In some models, go to Driving Assist, then Forward Collision-Avoidance Assist or Forward Collision
Warning and press the OK button
C
– In other models, go to Forward Safety and select Active Assist, Warning Only or Off
• Active Assist: Vehicle will provide a warning (audible & visual) and apply the brakes if needed
• Warning Only: Vehicle will provide a warning only (audible & visual)
• Off: System is off, no warnings or braking provided
• To adjust the FCA initial warning activation time, go to User Settings , Driver Assistance, Warning
Timing then select Normal, Early or Late, depending on your Kia model:
– Early/Normal: Maximizes the amount of distance between the vehicles before the initial warning occurs
– Late: Reduces the amount of distance between the vehicles before the initial warning occurs
FCA/FCW will become active when the:
• Ignition is on or the Engine Start/Stop button* is ON
• Vehicle is traveling faster than 5 mph
• Electronic Stability Control (ESC) is ON
C
B
FCA Warning Volume
can be adjusted in the
User Settings in the
Instrument Cluster or the
Vehicle Settings* on the
audio head unit. Go to
Driver Assistance, then
Warning Volume
QUICK TIP
A
Refer to the inside front cover for
more information on QR codes.
www.youtube.com/KiaFeatureVideos
QR CODES
Forward Collision-
Avoidance Assist (FCA)
Video
Forward Collision-Avoidance Assist (FCA)
†6
Forward Collision-Avoidance Assist (FCA) is not a substitute for safe driving and may not detect all objects in
front of the vehicle. Always drive safely and use caution.
Actual User Settings steps may vary by model. Refer to section 4 in the Owner’s Manual for more information.
For illustrative purposes only. Your actual display, buttons and/or features may vary.
REMINDERS:
• FCA will be activated by default when the ignition is cycled ON,
even when previous setting was OFF
• If FCA is operating and the ESC (Electronic Stability Control) is
turned off, FCA system is automatically turned off
• When the FCA system is off, the FCA warning indicator is on in the
Instrument Cluster
(Type A; Controls located on right
side of Steering Wheel)