Kia SELTOS - Lane Following Assist (LFA)

*IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
16
SELTOS FEATURES & FUNCTIONS GUIDE
ADAS
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
RES
SET
CNCL
+
–
CRUISE
OK
RES
SET
CNCL
+
–
CRUISE
OK
RES
SET
CNCL
+
–
CRUISE
OK
RES
SET
+
–
CRUISE
OK
RES
SET
+
–
CRUISE
OK
RES
SET
+
–
CRUISE
MODE
OK
RES
SET
+
–
CRUISE
CANCEL
CANCEL
OK
RES
SET
+
–
CRUISE
CANCEL
OK
MODE
(Controls on right side of Steering Wheel
if LFA/SCC equipped)
Lane Following Assist (LFA)*
†6
REMINDERS:
• If the ignition is cycled, LFA returns to its previous state, on or off, if activated in the User Settings menu
and when combined with SCC. If using the Steering Wheel LKA button, then LKA defaults to off
• LFA is not a substitute for safe and proper driving. Always drive safely and use caution
Lane Following Assist (LFA) is designed to help ensure that the vehicle stays centered in
its lane
A
by monitoring the detected lane markings ahead and adjust the steering. When
turned on, the instrument cluster indicator will initially illuminate white when turned ON,
and on some vehicles, when SCC is engaged. It will remain white when the system does
not detect the lane markers. When the system detects the lane markers and can assist the
steering, the LFA icon will illuminate green
B
.
LFA will operate only when these conditions are met:
• When the SCC is on and operating
• LKA recognizes both sides of the lane markers the vehicle is traveling in
• The vehicle is traveling slower than 95 mph
LFA User Settings:
• To go to User Settings in the Instrument Cluster, press the Mode button
C
on the
Steering Wheel when the vehicle is at a standstill, gear shift is in Park and with the ignition
on or the Engine Start/Stop button* in the ON position, and select User Settings
• To enable LFA, when in User Settings, press the Move (OK) button
D
up/down and
Select Driver Assistance then Driving Assist, Select Lane Following Assist. Press the
OK button
D
• Some models access settings through the Vehicle Settings in the audio head unit.
Press the SETUP hard key on the audio head unit, then VEHICLE on the screen to
enter Vehicle Settings
• Some vehicles have a Lane Driving Assist / Lane Safety button* on the Driver’s Panel
or the Steering Wheel . Press to activate Lane Following Assist
Images are for illustrative purposes
only and may not reflect actual
feature or operation.
LFA is supplemental. Do not solely
rely on this system and always
pay attention to the road and its
conditions.
Actual User Settings steps may
vary by model. See section 5 in
the Owner’s Manual for more
detailed information, limitations and
conditions.
A
B
Refer to the inside front cover for
more information on QR codes.
www.youtube.com/KiaFeatureVideos
QR CODES
Lane Following Assist
(LFA) Video
C
D