ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS. *IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
17
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
Highway Driving Assist is not a
substitute for safe driving, may
not detect all objects around the
vehicle, and only functions on
certain federal highways.
Always drive safely and use
caution. See section 5 in the
Owner’s Manual for more
detailed information, limitations
and conditions. Images are for
illustrative purposes only and
may not reflect actual feature or
operation.
Highway Driving Assist (HDA)*
Highway Driving Assist (HDA) is designed to adjust the speed of the vehicle
when driving on federal highways. The system can adjust the vehicle’s speed
based on available highway speed information. The automatic speed setting
mode is designed to set the speed automatically by adjusting to the current
speed limits of the highway the vehicle is traveling on.
To turn HDA on, go to User Settings in the Instrument Cluster or the Vehicle
Settings* in the audio head unit. Go to Drive Assistance > Driving Assist >
Highway Driving Assist and press the OK button
B
on the Steering Wheel.
HDA will operate only when these conditions are met:
• The vehicle is traveling slower than 95 mph
• When driving on federal highways
• When the SCC is on and operating
• When the SCC speed is set to current federal
highway speed
To activate HDA, turn Smart Cruise Control (SCC) on by pressing the Driving Assist CRUISE button
C
on the
Steering Wheel. When HDA is activated and the conditions are met, the Instrument Cluster indicator light
D
will illuminate green. If the conditions are not met, HDA will be in standby mode and the indicator light
D
will
illuminate white.
When in operation, and if both lanes are recognized, a display
E
will show the
lanes illuminated white and the steering wheel indicator illuminated green.
If HDA is activated, conditions are met and the SCC speed is set by the
driver (at the posted highway speed limit or slower), HDA will enter the
automatic speed setting mode. The set speed and AUTO will be displayed
F
in green and an audible alert will sound.
Safe Exit Assist (SEA) System*
†6
Safe Exit Assist (SEA) can help prevent
passengers from opening their door by
displaying a warning message on the
Instrument Cluster
A
and sounding an
audible warning when a vehicle is detected,
approaching from behind, and after your
vehicle has stopped.
To turn on SEA, go to User Settings in the
Instrument Cluster or the Vehicle Settings* in
the audio head unit, select Driver Assistance,
then Blind-Spot Safety, and select Safe Exit
Assistance.
Images are for illustrative purposes
only and may not reflect actual feature
or operation.
See section 5 in the Owner’s Manual for
more information.
Vehicle Settings
Driver
Assistance
Blind-Spot
>
Climate
Lights
Menu
A
ADAS
D
mph
E
60
mph
F
RES
SET
CNCL
+
–
CRUISE
OK
RES
SET
CNCL
+
–
CRUISE
OK
RES
SET
CNCL
+
–
CRUISE
OK
RES
SET
+
–
CRUISE
OK
RES
SET
+
–
CRUISE
OK
RES
SET
+
–
CRUISE
MODE
OK
RES
SET
+
–
CRUISE
CANCEL
CANCEL
OK
RES
SET
+
–
CRUISE
OK
B
C
REMINDERS:
• If the driver changes the speed while
in automatic speed setting mode, it
deactivates and enters a manual mode
• When the ignition is cycled, the system
returns to its previous state, on or off
Refer to the inside front cover for
more information on QR codes.
www.youtube.com/KiaFeatureVideos
QR CODES
Highway Driving Assist
(HDA) Video
To Next Page
Loading...
