Kia SELTOS - Fuel Cap; Malfunction Indicator; Fuel Filler Lid Release; Hood Release Lever and Latch

*IF EQUIPPED
48
SELTOS FEATURES & FUNCTIONS GUIDE
Fuel Filler Lid ReleaseFuel Cap / Malfunction Indicator
(Check Engine Light)
To open the Fuel Filler lid:
1. Pull the Fuel Filler Door Open Lever
A
inside the vehicle
(on floor left of Driver’s Seat)
2. Pull the Fuel Filler door to fully open
B
To open the Fuel Cap, turn it counterclockwise
C
To access the Fuel Cap, pull the Fuel Filler Door
Open Lever
A
inside the vehicle (on floor left of
Driver’s Seat). Tighten for ONE CLICK to prevent
Malfunction Indicator from illuminating.
REMINDER: It is normal operation when tightening to hear one
click, and then when Fuel Cap is released, it clicks back
Place the Fuel Cap
on the inside of the
Fuel Filler Lid when
fueling
D
QUICK TIP
A
B
C
D
Opening the Hood:
1. Pull the Hood Release Lever
E
to unlatch the Hood
2. In the front of the vehicle, lift the Hood slightly, push
the secondary Latch to the front inside of the Hood’s
center and lift the Hood
Closing the Hood:
Lower the Hood by pressing the front center of the Hood.
Then, press down to securely lock in place.
Hood Release Lever and Latch
REMINDERS:
• While lowering and closing, keep hands away from under the Hood
• Open the Hood only after turning the engine off, on a flat surface, with
the gear shift in P (Park) position and setting the parking brake
• Make sure the hood is securely closed before driving
See section 4 in the Owner’s Manual for more information.
See section 4 in the Owner’s
Manual for more information.
See section 4 in the Owner’s Manual for more information.
OTHER KEY
FEATURES
OTHER KEY FEATURES
Refer to the inside front cover for
more information on QR codes.
www.youtube.com/KiaFeatureVideos
QR CODES
One-Click Fuel Cap
Video
E