101
6
6
Driving your vehicle Forward Collision-Avoidance Assist (FCA)
(Sensor fusion)
Front view camera
Front radar
Dirt, snow, or foreign substances on
the sensor cover or sensor may
adversely affect the sensing perfor
-
mance of the sensor.
䳜 Do not apply license plate molding
or foreign objects such as a
bumper sticker or a bumper guard
near the radar sensor. Doing so
may adversely affect the sensing
performance of the radar.
䳜 Always keep the radar sensor and
cover clean and free of dirt and
debris.
䳜 Use only a soft cloth to wash the
vehicle. Do not spray pressurized
water directly on the sensor or
sensor cover.
䳜 Be careful not to apply unneces
-
sary force on the radar sensor or
sensor cover. If the sensor is forc
-
ibly moved out of proper align
-
ment, Forward Collision-
Avoidance Assist may not operate
correctly. In this case, a warning
message may not be displayed.
We recommend that you have the
vehicle inspected by an authorised
Kia dealer/service partner.
䳜 If the front bumper becomes
damaged in the area around the
radar sensor, Forward Collision-
Avoidance Assist may not operate
properly. We recommend that
you have the vehicle inspected by
authorised Kia dealer/service
partner.
䳜 Use only genuine parts to repair
or replace a damaged sensor or
sensor cover. Do not apply paint
to the sensor cover.
䳜 NEVER install any accessories or
stickers on the front windscreen,
nor tint the front windscreen.
䳜 NEVER locate any reflective
objects (i.e. white paper, mirror)
To Next Page
Loading...
