121
6
6
Driving your vehicle Blind-Spot Collision Warning (BCW)
Blind-Spot Collision Warning
(BCW) (if equipped)
Blind-Spot Collision Warning
description
Blind-Spot Collision Warning uses
radar sensors in the rear bumper to
monitor and warn the driver of an
approaching vehicle in the driver's
blind spot area.
1. Blind-Spot area
The blind spot detection range
varies relative to vehicle speed.
Note that if your vehicle is
travelling much faster than the
vehicles around you, the warning
will not occur.
2. Closing at high speed
The Lane Change Assist feature
will warn you when it detects a
vehicle is approaching in an adja
-
cent lane at a high rate of speed.
If the driver activates the turn
signal when the function detects
an oncoming vehicle, the function
sounds an audible warning.
䳜 Always be aware of road condi
-
tions whilst driving and be warn
for unexpected situations even
though Blind-Spot Collision Warn
-
ing is operating.
䳜 Blind-Spot Collision Warning is
supplemental functions to assist
you. Do not entirely rely on the
functions. Always pay attention,
whilst driving, for your safety.
䳜 Blind-Spot Collision Warning is not
substitutes for proper and safe
driving. Always drive safely and
use caution when changing lanes
or backing up the vehicle.
To Next Page
Loading...
