Driving your vehicle
1666
Smart Cruise Control (SCC)
Always pay attention to the road
condition ahead.
In traffic situation
Use switch or pedal to accelerate
䳜 In traffic, your vehicle will stop if
the vehicle ahead of you stops.
Also, if the vehicle ahead of you
starts moving, your vehicle will
start as well. However, if the vehi
-
cle stops for more than 3 sec
-
onds, you must depress the
accelerator pedal or push up the
switch (RES+) or push down the
switch (SET-) to start driving.
If you push Smart Cruise Control
switch (RES+ or SET-) whilst Auto
Hold and advanced Smart Cruise
Control is operating the Auto Hold
will be released regardless of
accelerator pedal operation and
the vehicle will start to move. The
AUTO HOLD indicator changes
from green to white. (if equipped
with EPB (Electronic Parking
Brake))
Sensor to detect distance to the
vehicle ahead
Smart Cruise Control uses a front
radar to detect distance to the vehi
-
cle ahead.
If the radar sensor is covered with
dirt or other foreign matter, the
vehicle distance control may not
operate correctly.
Always keep the radar sensor clean.
Warning message
Smart Cruise Control disabled.
Radar blocked
To Next Page
Loading...
