Kia SELTOS - To Convert to Cruise Control Mode; Limitations of Smart Cruise Control

Driving your vehicle
1686
Smart Cruise Control (SCC)
Check Smart Cruise Control System
The message will appear when the
vehicle distance control function is
not functioning normally.
We recommend that you take your
vehicle to an authorised Kia dealer/
service partner and have the func
-
tion checked.
To convert to Cruise Control mode
The driver may choose to only use
the conventional Cruise Control
mode (speed control function) by
doing as follows:
1. Turn Smart Cruise Control on (the
cruise indicator light will be on but
the function will not be activated).
2. Push and hold the Vehicle Dis
-
tance button for more than 2 sec
-
onds.
3. Choose between "Smart Cruise
Control" and "Cruise Control".
When the function is cancelled using
the Driving Assist button is used
after the engine is turned on, Smart
Cruise Control mode will turn on.
WARNING
When using the Cruise Control
mode, you must manually adjust
the distance to other vehicles by
depressing the brake pedal. The
function does not automatically
adjust the distance to vehicles in
front of you.
Limitations of Smart Cruise Control
Smart Cruise Control may have lim
-
its to its ability to detect distance to
the vehicle ahead due to road and
traffic conditions.
On curves
䳜 Smart Cruise Control may not
detect a moving vehicle in your
lane, and then your vehicle could
accelerate to the set speed. Also,
the vehicle speed will decrease
when the vehicle ahead is recog
-
nized suddenly.
OSP2059125E
OSP2059012