169
6
6
Driving your vehicle Smart Cruise Control (SCC)
䳜 Select the appropriate set speed
on curves and apply the brakes or
accelerator pedal if necessary.
Your vehicle speed can be reduced
due to a vehicle in the adjacent lane.
Apply the accelerator pedal and
select the appropriate set speed.
Check to be sure that the road con
-
ditions permit safe operation of
Smart Cruise Control.
On inclines
䳜 During uphill or downhill driving,
Smart Cruise Control may not
detect a moving vehicle in your
lane, and cause your vehicle to
accelerate to the set speed. Also,
the vehicle speed will rapidly slow
down when the vehicle ahead is
recognized suddenly.
䳜 Select the appropriate set speed
on inclines and apply the brake or
accelerator pedal if necessary.
Lane changing
䳜 A vehicle which moves into your
lane from an adjacent lane cannot
be recognized by the sensor until
it is in the sensor's detection
range.
䳜 The radar may not detect imme
-
diately when a vehicle cuts in sud
-
denly. Always pay attention to
the traffic, road and driving condi
-
tions.
䳜 If a slower vehicle moves into
your lane, your speed may
decrease to maintain the distance
to the vehicle ahead.
䳜 If a faster vehicle which moves
into your lane, your vehicle will
accelerate to the set speed.
To Next Page
Loading...
