93
8
8
Maintenance Light bulbs
Head lamp low beam (LHD Vehicle)
Based on 10 m screen
A: Vehicle axis
B: Vertical line of the left head lamp bulb centre
C: Vertical line of the right head lamp bulb centre
D: Horizontal line of head lamp bulb centre
E: Ground
F: Cut-Off line
1. Turn the low beam on with 1 driver (75 kg) aboard.
2. The cut-off line should be projected in the cut-off line shown in the pic
-
ture.
3. First, adjust cut-off line to be matched with the horizontal line and then
adjust with the vertical line
4. If head lamp levelling device is equipped, adjust the head lamp levelling
device switch with 0 positions.
To Next Page
Loading...
