Kia Sonet 2024 - Page 120

51
4
4
Features of your vehicle LCD display
3 LO (1)
4 HI(2)
This indicator displays which wiper
speed is selected using the wiper con
-
trol.
You can activate or deactivate Wiper/
Lights Display function from the User
Settings mode in the cluster LCD display.
Engine has overheated
僅 This warning message appears when
the engine coolant temperature is
above 120 °C (248 °F). This mean that
the engine is overheated and may be
damaged.
* If your vehicle is overheated, refer to "If
the engine overheats" on page 7-7.
Low key battery (for smart key
system)
僅 This warning message appears if the
battery of the smart key is discharged
when the ENGINE START/STOP but
-
ton changes to the OFF position.
Press START button whilst turn -
ing wheel (for smart key system)
僅 This warning message appears if the
steering wheel does not unlock nor
-
mally when the ENGINE START/STOP
button is pressed.
僅 It means that you should press the
ENGINE START/STOP button whilst
turning the steering wheel right and
left.
Steering wheel unlocked (for
smart key system)
僅 This warning message appears if the
steering wheel does not lock when the
ENGINE START/STOP button changes
to the OFF position.
Check steering wheel lock system
(for smart key system)
僅 This warning message appears if the
steering wheel does not lock normally
when the ENGINE START/STOP but
-
ton changes to the OFF position.
Press clutch pedal to start engine
(for smart key system and manual
transmission)
僅 This warning message appears if the
ENGINE START/STOP button changes
to the ACC position twice by pressing
the button repeatedly without
depressing the clutch pedal.
僅 It means that you should depress the
clutch pedal to start the engine.
Key not in vehicle (for smart key
system)
僅 This warning message appears if the
smart key is not in the vehicle when
you press the ENGINE START/STOP
button.
僅 It means that you should always have
the smart key with you.
Key not detected (for smart key
system)
僅 This warning message appears if the
smart key is not detected when you
press the ENGINE START/STOP but
-
ton.
Shift to P or N to start engine (for
smart key system)
僅 This warning message appears if you
try to start the engine with the shift
lever not in the P (Park) or N (Neutral)
position.
Press brake pedal to start engine
(for smart key system)
僅 This warning message appears if the
ENGINE START/STOP button changes