Kia Sonet 2024 - Page 135

Features of your vehicle
664
Lighting
High Beam Assist operation
Display and control
僅 After selecting HBA (High Beam
Assist)
in the Settings menu, High
Beam Assist will operate by following
the procedure below.
- Place the headlamp switch in the
AUTO position and push the head
-
lamp lever towards the instrument
cluster. The High Beam Assist ( )
indicator light will appear on the
cluster and the function will be
enabled.
- When the function is enabled, high
beam may turn on when vehicle
speed is above 30 km/h (20 mph).
When vehicle speed is below 20
km/h (12 mph), high beam will not
turn on.
- The High Beam ( ) indicator light
will appear on the cluster when
high beam is on.
僅 When High Beam Assist is operating,
if the headlamp lever or switch is
used, the function operates as follows:
- If the headlamp lever is pulled
towards you when the high beam is
off, the high beam will turn on with
-
out High Beam Assist cancelled.
When you let go of the headlamp
lever, High Beam Assist will turn on
again.
- If you push the light switch towards
the instrument cluster, high beam is
turned on and High Beam Assist is
turned off.
- If the headlamp lever is pulled
towards you when the high beam is
on by High Beam Assist, low beam
will be on and the function will turn
off.
- If the headlamp switch is placed
from AUTO to another position
(headlamp/position/off), High
Beam Assist will turn off and the
corresponding lamp will turn on.
僅 When High Beam Assist is operating,
high beam switches to low beam if
any of the following conditions occur:
- When the headlamp of an oncom
-
ing vehicle is detected.
- When the taillamp of a vehicle in
front is detected.
- When the headlamp or taillamp of a
motorcycle or a bicycle is detected.
- When the surrounding ambient
light is bright enough that high
beams are not required.
- When streetlights or other lights are
detected.
High Beam Assist malfunction
and limitations
High Beam Assist malfunction
A: Check High Beam Assist (HBA) sys -
tem
When High Beam Assist is not working
properly, the warning message will
appear and warning light ( ) will
appear on the cluster. Have the function
inspected by an authorised Kia dealer.
Limitations of High Beam Assist
High Beam Assist may not work properly
in the following situations:
OCV051213L