13
5
5
Driving your vehicle ENGINE START/STOP button
You can also start the engine when
the shift lever is in the N (Neutral)
position.
4. Press the ENGINE START/STOP but
-
ton.
It should be started without depress
-
ing the accelerator pedal.
5. Do not wait for the engine to warm up
whilst the vehicle remains stationary.
Start driving at moderate engine
speeds. (Steep accelerating and
decelerating should be avoided.)
Starting the diesel engine
To start the diesel engine when the
engine is cold, it has to be pre-heated
before starting the engine and then
have to be warmed up before starting to
drive.
1. Make sure the parking brake is
applied.
2.
Intelligent Manual Transmission
(iMT)
- Shift the transmission into
Neutral. Keep the brake pedal
depressed whilst pressing the ENGINE
START/STOP button to the START
position.
If the status is changed into ACC, the
engine will not start, and it will be dis
-
played on the cluster as in the follow
-
ing pop-up.
A:
Press brake pedal to start engine
When the shift lever is not placed in N
(Neutral), the following pop-up will be
displayed on the cluster.
A:
Shift to neutral for auto start
Do not wait for the engine to warm up
whilst the vehicle remains stationary.
Start driving at moderate engine
speeds. (Steep accelerating and
decelerating should be avoided.)
Automatic Transmission
- Place the
transmission shift lever in P (Park).
Depress the brake pedal fully.
You can also start the engine when
the shift lever is in the N (Neutral)
position.
Glow indicator light
3. Press the ENGINE START/STOP but
-
ton whilst depressing the brake pedal.
4. Continue depressing the brake pedal
until the illuminated glow indicator
goes off. (approximately 5 seconds)
5. The engine starts running when the
glow indicator goes off.
僅 Recommend to wait for the diesel
engine to warm up whilst the vehicle
remains stationary in winter for a
whilst and drive.
僅 Recommend to use diesel fuel in a
high altitude mountain or country
where you visit in winter.
To Next Page
Loading...
