21
5
5
Driving your vehicle Automatic transmission
Automatic transmission (if
equipped)
Automatic transmission opera
-
tion
The automatic transmission has 6 for
-
ward speeds and one reverse speed.
The individual speeds are selected auto
-
matically, depending on the position of
the shift lever.
The first few shifts on a new vehicle, if
the battery has been disconnected, may
be somewhat abrupt. This is a normal
condition, and the shifting sequence will
adjust after shifts are cycled a few times
by the TCM (Transmission Control Mod
-
ule) or PCM (Powertrain Control Mod
-
ule).
For smooth operation, depress the brake
pedal when shifting from N (Neutral) to
a forward or reverse gear.
Automatic transmission
僅 Always check the surrounding areas
near your vehicle for people, espe
-
cially children, before shifting a vehi
-
cle into D (Drive) or R (Reverse).
僅 Before leaving the driver's seat,
always make sure the shift lever is in
the P (Park) position; then set the
parking brake fully and shut the
engine off. Unexpected and sudden
vehicle movement can occur if these
precautions are not followed in the
order identified.
僅 Do not use the engine brake (shifting
from a high gear to lower gear) rap
-
idly on slippery roads.
The vehicle may slip causing an acci
-
dent.
僅 To avoid damage to your transmis
-
sion, do not accelerate the engine in R
(Reverse) or any forward gear posi
-
tion with the brakes on.
僅 When stopped on an incline, do not
hold the vehicle stationary with
engine power. Use the service brake
or the parking brake.
僅 Do not shift from N (Neutral) or P
(Park) into D (Drive), or R (Reverse)
when the engine is above idle speed.
Transmission ranges
The indicator in the instrument cluster
displays the shift lever position when the
ignition switch is in the ON position.
P (Park)
Always come to a complete stop before
shifting into P (Park). This position locks
the transmission and prevents the front
wheels from rotating.
僅 Shifting into P (Park) whilst the vehicle
is in motion will cause the drive