Driver assistance system
246
Cruise Control (CC)
僅 When driving at a tollgate or intersec
-
tion
If you pass a tollgate or intersection
with lots of vehicles or you drive
where lanes are merged or divided
frequently, Leading Vehicle Departure
Alert may not operate properly.
Driver Attention Warning may not oper
-
ate for 15 seconds after the vehicle is
started, or the front view camera is ini
-
tialized.
For more details on the precautions of
the front view camera, refer to "Forward
Collision-Avoidance Assist (FCA) (Front
Camera Only) (if equipped)" on page 6-
3.
Cruise Control (CC) (if
equipped)
1
Cruise indicator
2
Set speed
Cruise Control will allow you to drive at
speeds above 30 km/h (20 mph) without
depressing the accelerator pedal.
Cruise Control operation
Setting speed
1. Accelerate to the desired speed,
which must be more than 30 km/h
(20 mph).
2. Press the Driving Assist button at the
desired speed. The set speed and
Cruise ( ) indicator will appear
on the cluster.
3. Release the accelerator pedal.
Vehicle speed will maintain the set
speed even when the accelerator
pedal is not depressed.
僅 The vehicle may slightly slow down or
speed up whilst driving uphill or
downhill.
To Next Page
Loading...
