EasyManua.ls Logo

Kia Sonet 2024 - Page 316

Kia Sonet 2024
429 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
8
8
Maintenance Explanation of scheduled maintenance items
excessive amount of foreign matter
accumulates in the fuel tank, the filter
may require replacement more fre
-
quently.
After installing a new filter, run the
engine for several minutes, and check
for leaks at the connections. We recom
-
mend that the fuel filter be replaced by a
professional workshop. Kia recommends
to visit an authorised Kia dealer/service
partner.
Fuel lines, fuel hoses and connec
-
tions
Check the fuel lines, fuel hoses and con
-
nections for leakage and damage. We
recommend that the fuel lines, fuel
hoses and connections be replaced by a
professional workshop. Kia recommends
to visit an authorised Kia dealer/service
partner.
WARNING
Diesel only
Never work on the injection system with
the engine running or within 30 seconds
after shutting off the engine. High pres
-
sure pump, rail, injectors and high pres
-
sure pipes are subject to high pressure
even after the engine stops. The fuel jet
produced by fuel leaks may cause seri
-
ous injury, if it touches the body. People
wearing a cardiac pacemaker should
maintain a distance of at least 30 cm
from the ECU or wiring harness within
the engine room whilst the engine is run
-
ning, since the high currents in the Com
-
mon Rail system produce considerable
magnetic fields.
Vapor hose and fuel filler cap (for
petrol engine)
The vapor hose and fuel filler cap should
be inspected at those intervals specified
in the maintenance schedule. Make sure
that a new vapor hose or fuel filler cap is
correctly replaced.
Vacuum crankcase ventilation
hoses
Inspect the surface of hoses for evi
-
dence of heat and/or mechanical dam
-
age. Hard and brittle rubber, cracking,
tears, cuts, abrasions, and excessive
swelling indicate deterioration. Particular
attention should be paid to examine
those hose surfaces nearest to high heat
sources, such as the exhaust manifold.
Inspect the hose routing to assure that
the hoses do not come in contact with
any heat source, sharp edges or moving
components which might cause heat
damage or mechanical wear. Inspect all
hose connections, such as clamps and
couplings, to make sure they are secure,
and that no leaks are present. Hoses
should be replaced immediately if there
is any evidence of deterioration or dam
-
age.
Air cleaner filter
We recommend that the air cleaner filter
be replaced by a professional workshop.
Kia recommends to visit an authorised
Kia dealer/service partner.
Spark plugs
Make sure to install new spark plugs of
the correct heat range.
When assembling parts, be sure to wipe
the inside and outside of the boot bot
-
tom of the ignition coil and the insulator

Table of Contents

Related product manuals