13
3
3
Safety features of your vehicle Seat
rest to the lowest position. The rear
seat headrest can reduce the visibility
of the rear area.
Adjusting the height up and
down (if equipped)
僅 To raise the headrest, pull it up to the
desired position (1).
僅 To lower the headrest, push and hold
the release button (2) on the headrest
support and lower the headrest to the
desired position (3).
Removal and installation (if
equipped)
僅 To remove the headrest, raise it as far
as it can go then press the release
button (1) whilst pulling the headrest
up (2).
僅 To reinstall the headrest, put the
headrest poles (3) into the holes whilst
pressing the release button (1).
僅 Then adjust it to the appropriate
height.
Make sure the headrest locks in position
after adjusting it to properly protect the
occupants.
Armrest (if equipped)
To use the armrest, pull it forward from
the seatback.
To Next Page
Loading...
