Maintenance
608
Light bulbs
ning lamp (LED), for it may damage
related parts of the vehicle.
Replacing front fog lamp (LED
type)
If fog lamp equipped with LED(1) does
not operate, we recommend that the
system be checked by a professional
workshop. Kia recommends to visit an
authorised Kia dealer/service partner.
Replacing side direction indica
-
tor lamp bulb (bulb type)
1. Remove the lamp assembly from the
vehicle by prying the lens and pulling
the assembly out.
2. Disconnect the bulb electrical connec
-
tor.
3. Separate the socket and the lens parts
by turning the socket counterclock
-
wise until the tabs on the socket align
with the slots on the lens part.
4. Remove the bulb by pulling it straight
out.
5. Insert a new bulb in the socket.
6. Reassemble the socket and the lens
part.
7. Connect the bulb electrical connector.
8. Reinstall the lamp assembly to the
body of the vehicle.
If it does not operate, Kia recommends
to visit an authorised Kia dealer/service
partner or a professional workshop.
Replacing side repeater lamp
(LED Type) bulb
If the side repeater lamp LED (1), does
not operate, we recommend that the
system be checked by a professional
workshop. Kia recommends to visit an
authorised Kia dealer/service partner.
Replacing rear turn signal lamp/
tail and stop lamp bulb (bulb
type) (rear combination lamp
type A, B)
Type A
Type B
1. Turn signal lamp
2. Tail and stop lamp
To Next Page
Loading...
