Features of your vehicle
1205
Lighting
To turn on the high beam headlamp:
僅 Push the lever away from you.
The lever will return to its original
position.
The high beam indicator will light
when the headlight high beams are
switched on.
Do not use high beam when there are
other vehicles. Using high beam could
obstruct the other driver's vision.
To flash the headlights:
僅 Pull the lever towards you.
It will return to the normal (low beam)
position when released. The head
-
light switch does not need to be on to
use this flashing feature.
Operating turn signals and lane
change signals
The ENGINE START/STOP button must
be on for the turn signals to function.
To turn on the turn signals:
僅 Move the lever up or down (A).
The green arrow indicators on the
instrument panel indicate which turn
signal is operating.
They will self-cancel after a turn is
completed. If the indicator continues
to flash after a turn, manually return
the lever to the OFF position.
To signal a lane change:
僅 Move the turn signal lever slightly and
hold it in position (B).
To Next Page
Loading...
