141
6
6
Driving your vehicle Lane Following Assist (LFA)
Lane Following Assist settings
Turning On/Off
With the ENGINE START/STOP button in
the ON position, shortly press the Lane
Driving Assist button located on the
steering wheel to turn on Lane Following
Assist. The white or green ( ) indicator
light will appear on the cluster.
Press the button again to turn off the
function.
Warning volume
With the ENGINE START/STOP button in
the ON position, select 'Driver Assistance
→ Warning Volume' from the Settings
menu to change the Warning Volume to
'High', 'Medium', or 'Low' for Hands-off
warning.
However, even if 'Off' is selected (if
steering wheel vibration equipped),
Hands-off Warning Volume will not turn
off but the volume will sound as 'Low'.
If you change the Warning Volume, the
Warning Volume of other Driver Assis
-
tance systems may change.
Lane Following Assist operation
Warning and control
Lane Following Assist
If the vehicle ahead and/or both lane
markings are detected and your vehicle
speed is below 200 km/h (120 mph), the
green ( ) indicator light will appear on
the cluster, and the function will help the
vehicle stay in lane by assisting the
steering wheel.
When the steering wheel is not assisted,
the green ( ) indicator light will blink
and change to white.
To Next Page
Loading...
