73
8
8
Maintenance Light bulbs
Kia recommends to visit an authorised
Kia dealer/service partner.
The LED lamp cannot be replaced as a
single unit because it is an integrated
unit. The LED lamp has to be replaced
with the unit.
A skilled technician should check or
repair the high mounted stop lamp
(LED), for it may damage related parts of
the vehicle.
Replacing license plate lamp (LED
type)
If the license plate lamp does not oper
-
ate, we recommend that the system be
checked by a professional workshop. Kia
recommends to visit an authorised Kia
dealer/service partner. The LED lamp
cannot be replaced as a single unit
because it is an integrated unit. The LED
lamp has to be replaced with the unit. A
skilled technician should check or repair
the map lamp (LED), for it may damage
related parts of the vehicle.
Replacing map lamp (Bulb type)
Prior to working on the Interior lamps,
ensure that the "OFF" button is
depressed to avoid burning your fingers
or receiving an electric shock.
1. Turn off vehicle and disconnect the (-)
battery terminal from the battery.
2. Using a flat-blade screwdriver, gently
pry the lens cover from lamp housing.
3. Remove the bulb by pulling it straight
out.
4. Install a new bulb in the socket.
5. Align the lens cover tabs with the
lamp housing notches and snap the
lens into place.
Be careful not to dirty or damage the
lens, lens tab, and plastic housings.
To Next Page
Loading...
